Radar detector & Laserjammer - the expert shop with installation service ----- Hotline +49-6221-619097 ----- info@radar-auto.de
€713,45
The Stinger Freedom Laser (1x1) consists of two elements - two outdoor sensors (1x sender, 1x receiver) and a control unit. The sensors, which have now been further reduced compared to any other model on the market,
Stinger freedom lasers have special infrared lenses that recognize the measurement with the laser gun and react with the same pulse frequency depending on the detected laser gun. The laser gun will then not be able to display any measured value, since an evaluation of its own reflection radiation, which is now mixed with the radiation from the Laserguard diode.
The control and display unit contains a display and a loudspeaker. The TouchStrip indicates whether the system is ready for operation. In addition, the device now also offers USB update options. The Stinger Freedom Laser ("1x1") is equipped with the smallest sensors in its performance class. Outstanding laser reception was achieved through carefully developed hardware and software of the receiving system, based on the manufacturer's patented innovations.
During the development of the system, the top objctive was perfect functionality paired with ultimate efficiency in all circumstances, improved filtering of sun interference and laser sources, improved resistance to temperature fluctuations and electromagnetic interference. Although the sensors have become smaller, the control unit has grown and offers new functions and extensions. The system can consist of up to 6 ("3x3") sensors.
The sensors are installed in the front of the vehicle and protect against laser measurements. Depending on the vehicle, 2 ("1x1") or more sensors may be required. 2 sensors are sufficient for a normal car. For a vehicle with a large front, such as an SUV, 4 ("2x2") sensors are necessary, for a trucks it may be even 6 sensors ("3x3").
When a laser gun is aimed at the vehicle, the system recognizes the type of laser measurement and reacts so that the measuring device cannot evaluate your laser reflections. An incorrect measurement is displayed on the laser measuring device. The operator will then try to measure again. He assumes that he has not aimed correctly or that the vehicle is reflecting poorly. The driver can now adjust the speed. After this is done, you should turn off the system. For safety reasons, the Freedom system is automatically switched off e.g. after 4 seconds (set by the user). For optimal function, the receiver should be mounted near the license plate, since the pistol is pointed at the vertical license plate in almost all cases. A recommendable place is in or behind the grille. The sensors should be horizontal and cleaned from time to time.
About speed measurements with radar ("speed trap")
The meter from the authorities can be installed in a vehicle or on a roadside tripod or fixed in a box. It controls the incoming traffic and is effective up to a distance of 40 m. The radar radiation hits the vehicle and is reflected. As the vehicle moves toward the meter, the frequency of the reflected radiation increases. The pace is calculated from this. If it is above the limit, a photo ("with flash") is triggered to capture license plates and drivers. The measured pace is shown in the photo. Radar measurements are used all over Europe, a real-time warning by a high-quality fixed radar detector is possible without any problems.
Speed measurements with single-sided sensor eso 3.0 ("light barrier")
In recent years, a new mobile measuring device has become popular, particularly in Germany: the so-called "single-sided sensor eso 3.0", which is sometimes referred to as light barrier measurement due to the previous generations. The measuring device eso 3.0 is distinctive due to its characteristic structure and can be easily recognized due to the large number of photos on the Internet. In principle, proven radar detectors and laser systems remain ineffective here since neither radar nor laser light waves are emitted by the measuring device. After no protection was possible for a long time, there is now a remedy in the form of the eso guard PRO, which is installed as a fixed installation solution on the license plate.
Speed measurements with follow-up video ("PROVIDA video car")
In a video tracking measurement, the measuring vehicle, which is often not recognizable as such, travels behind the car to be checked over a distance of at least 300 m. A video camera captures the monitored car, and a computer connected to the speedometer calculates the average speed on the track. There is a tolerance deduction of 5 km / h. This measurement method is used regularly on motorways in Germany, mostly it is vehicles of German brands of the middle and upper class.The warning and protection by radar detectors or laser interference is technically not possible. The Target Blueye does provide a warning based on TETRA technology (check your country whether TETRA is used in your country).
Radar detectors, laser jammer, GPS-based speed camera warning systems against radar, laser and speed cameras have been known for many years and now, high-end hidden permanent radar detector installation becomes more and more popular throughout Europe. We install your new radar detector and laser jammer professionally into your vehicle!
Living far away? Just order radar detector online - we ship almost worldwide!