Laserjammer Blinder HP905 Quad
Blinder offers the new Blinder HP905 compact laser jamming system. The new (in quad system) 4 sensors are very small and are operated by extremely powerful laser diodes. The new sensors are easy to accommodate in the narrowest areas of the vehicle front and make assembly and integration into the vehicle front very easy. The new sensors are stronger than any previous model, with both high power LEDs and high power laser diodes integrated into the small sensors. The quad set includes 4 sensors. If you drive a large SUV, you should purchase the quad sensor version of the Blinder HP905 compact system with 4 sensors offered here.
The new Blinder HP905 has a variable volume control and a new voice output as a warning, which identifies the type of laser gun or laser speed camera with which your vehicle is aimed. The alarm tones are now easier to identify, especially when the vehicle interior is noisy.
The Blinder HP905 compact can be operated in 3 modes: parking assist mode, receiver mode (simple laser detection, but w / o active interference) and defense mode (active interference mode to respond to received laser signals). You can switch between these operating modes with the remote selector switch. The software of the Blinder HP 905 can be updated. With a computer and the supplied USB cable, the CPU software can be updated in order to be prepared for the future in the case of newly introduced laser measurements. Updates are free and can be downloaded from the manufacturer's website.
A laser device emits an infrared beam at intervals for purposes of tempo measurement, which is reflected by the targeted vehicle. By recognizing these reflections on the individually emitted beams, the exact speed of the vehicle is now calculated. These calculations are therefore based on the clear assignment of light reflections. However, if additional light pulses occur in the same frequency range at the targeted target, the reflected beams cannot be clearly assigned and the speed cannot be calculated. The laser blinder emits multifrequency infrared light that is invisible to the eye. After a laser beam strikes the front of the vehicle, a large number of further light pulses are now reflected in the direction of the laser device in addition to the actual light reflection, so that no measurement can take place there. The two emitters are attached inconspicuously to the front part of the vehicle. Since four emitters are used in the quad set, the complete vehicle front, even the larger vehicles, is shielded. The exterior mirrors are also enclosed by the emitted light frequencies. The Blinder HP 905 dual sensibly emits the light frequencies continuously when the vehicle is in operation, because emitting the frequencies in response to a received laser signal may already be too late.